The three different differential​ scanning calorimeters are housed in the instrument room in the second target station (TS2) and in the ISIS Hydrogen and Catalysis Laboratory.

1. Mettler Toledo DSC1​

The Mettler Toledo DSC1 is located in the instrument room, located on ​the west side of ​​​​TS2​ (R80). The DSC1 is a fully automated thermal analysis instrument for investigating enthalpic changes in your samples.

• Operating range from -150 to 700 °C
  

• Liquid nitrogen cooling system for low temperature measurements

• Argon purge gas

• 34-position auto sampler with an internal reference position

• Pre-programmed or entirely user-defined experimental methods​​
  

Manufacturer's details

View full-size image

​

​2. TA Instruments DSC Q2000​

​​The TA Instruments DSC Q2000 is located in the instrument room, located on ​the west side of ​​​​TS2​ (R80).​ The DSC Q2000 is the second of our two research-grad​e thermal analysis instruments in the instrument room. 

• Operating range from ambient to 450 °C​ (manual cold loading is possible)
  

• Nitrogen & helium purge gas
  

• Pre-programmed or entirely user-defined experimental methods

• Thermal Advantage Platinum software for ease-of-use
  

• Operating range: V​acuum to 69 bar​​
  

View full-size image​

​

​

3. Netzsch Jupiter F3​

The Netzsch Jupiter F3 is located in the Hydrogen and Catal​ysis Laboratory, located in R79. The Jupiter F3 is a high performance, high temperature thermogravimetric analysis instrument, with thermo-microbalance and differential scanning calorimetry capabilities.

• Operation from ambient to 1500 °C

• Flow control for gas dosing
  

• Can be used with corrosive gases; ammonia gas available​
  

• Mass spectrometer available​​
  

Manufacturer's details​​

View full-size image​​

​​
​